[c-nsp] Monitoring Tengigabit Interfaces

[David Prall]

Optics have to be DOM Compliant.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compa
tibility/matrix/OL_8031.html

http://tinyurl.com/2jedp2

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of DAVID 
> Sébastien
> Sent: Wednesday, March 26, 2008 9:44 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Monitoring Tengigabit Interfaces
> 
>  
> 
> Hi,
> 
>  
> 
> I would like to monitor the Optical Power in the Ten Gigabit 
> interface.
> 
>  
> 
> I use this command : show int teX/y transceiver. 
> 
>  
> 
> On some interfaces I've a answer :
> 
>  
> 
> 1#sh int te2/1 transceiver
> 
> Transceiver monitoring is disabled for all interfaces.
> 
>  
> 
> ITU Channel not available (Wavelength not available),
> 
> Transceiver is internally calibrated.
> 
> If device is externally calibrated, only calibrated values 
> are printed.
> 
> ++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
> 
> NA or N/A: not applicable, Tx: transmit, Rx: receive.
> 
> mA: milliamperes, dBm: decibels (milliwatts).
> 
>  
> 
>                                          Optical   Optical
> 
>          Temperature  Voltage  Current   Tx Power  Rx Power
> 
> Port     (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
> 
> -------  -----------  -------  --------  --------  --------
> 
> Te2/1      38.5       0.00       7.9      -1.9      -3.0
> 
>  
> 
>  
> 
> But for another I have :
> 
>  
> 
> #sh int gi9/1 transceiver
> 
> Diagnostic Monitoring Data is not available.
> 
>  
> 
> Why this command failed on some interfaces ?
> 
>  
> 
> Regards,
> 
>  
> 
> Sébastien DAVID
> 
>  
> 
> Service Exploitation Réseau
> 
> Ecritel
> site de Clichy : 7-9, rue Petit
> 92582 Clichy Cedex
> Tél: 01.73.02.50.76
> Fax: 01.47.56.04.48 
> Email: kourif at ecritel.net <mailto:jmlemoine at ecritel.net> 
> Site web: www.ecritel.fr <http://www.ecritel.fr/> 
> 
> This message and any attachments (the "message") is intended 
> solely for the addressees and is confidential. If you receive 
> this message in error, please delete it and immediately 
> notify the sender. Any use not in accord with its purpose, 
> any dissemination or disclosure, either whole or partial, is 
> prohibited except formal approval. The internetcan not 
> guarantee the integrity of this message. ECRITEL (and its 
> subsidiaries) shall (will) not therefore be liable for the 
> message if modified. 
> ---------------------------------------------
> Ce message et toutes les pieces jointes (ci-apres le 
> "message") sont etablis a l'intention exclusive de ses 
> destinataires et sont confidentiels. Si vous recevez ce 
> message par erreur, merci de le detruire et d'en avertir 
> immediatement l'expediteur. Toute utilisation de ce message 
> non conforme a sa destination, toute diffusion ou toute 
> publication, totale ou partielle, est interdite, sauf 
> autorisation expresse. L'internet ne permettant pas d'assurer 
> l'integrite de ce message, ECRITEL (et ses filiales) 
> decline(nt) toute responsabilite au titre de ce message, dans 
> l'hypothese ou il aurait ete modifie.
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/