[c-nsp] 3750 etherchannel only using 1 port

[Paul]

The src-dst-ip works on any switch at any level.  I use it on 2960 
switches 3550, 3750, 6509, etc.  It works on everything but my 3750 and 
i'm not even doing cross stack etherchannel on the 3750 so I don't know 
what is up with it.   I can't play around with it too much since It's in 
operation and I wasn't expecting it to break in 12.2.44SE1 :/   

gi1/0/1
 Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  30 second input rate 25329000 bits/sec, 9503 packets/sec
  30 second output rate 0 bits/sec, 0 packets/sec
     2714579689 packets input, 1139748310253 bytes, 0 no buffer
     Received 34498 broadcasts (34498 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

gi1/0/2
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  30 second input rate 14640000 bits/sec, 3969 packets/sec
  30 second output rate 23801000 bits/sec, 5139 packets/sec
     1568433448 packets input, 904763903192 bytes, 0 no buffer
     Received 145644 broadcasts (145644 multicasts)
     0 runts, 0 giants, 0 throttles


See what I mean??  It's router to router so MAC won't work and there are 
thousands and thousands of ip addresses going through this so the 
src-dst-ip should work no problem, but it doesn't. :/

I don't get it.. I've tried changing it to dst-ip, src-ip, even mac and 
still no luck.
I've never seen etherchannel not work before like this.  A 2960 switch 
plugged into the same device works with src-dst-ip no problem.

Paul