[c-nsp] SPAN for POS?

[Hank Nussbacher]

At 03:57 PM 13-05-08 +0000, hulbertj at comcast.net wrote:
>Yes, use the switchport capture feature.
>
>http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/sx_swcg.pdf
>create the VACL first and then set a switchport as "capture".
>
>You can apply the VACL to a WAN interface.

Thanks.  I found:
<http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/vacl.html>
but would like to see an IOS config of this in action.

Something that would take:
monitor session 1 source interface Gi7/1 tx
monitor session 1 destination interface Gi9/16
monitor session 2 source interface Gi7/1 rx
monitor session 2 destination interface Gi9/17
and do the same via VACLs.

If you can send actual IOS snippets that would be great!

Thanks,
Hank