[c-nsp] Need help with L2TPv3

[Steven Pfister]

The configs are below. 

By the way... whenever I post to this list, I get replies both to me and to the list (so I get two copies). Is this intentional? Just curious...

Thanks!

--Steve

----------
router 1
----------

Current configuration : 1374 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SanFran
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
memory-size iomem 15
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
!
!
l2tp-class l2-dyn
 password 7 15025C0600722C21
 cookie size 8
!
pseudowire-class pw-dynamic
 encapsulation l2tpv3
 protocol l2tpv3 l2-dyn
 ip local interface Loopback0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 10.1.1.102 255.255.255.0
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
 no cdp enable
!
interface FastEthernet0/0.200
 encapsulation dot1Q 200
 no snmp trap link-status
 no cdp enable
 xconnect 10.1.1.103 33 pw-class pw-dynamic
!
interface FastEthernet0/0.201
 encapsulation dot1Q 201
 no snmp trap link-status
 no cdp enable
!
interface ATM2/0
 no ip address
 shutdown
 no atm ilmi-keepalive
 no scrambling-payload
!
interface ATM2/1
 no ip address
 shutdown
 no atm ilmi-keepalive
 no scrambling-payload
!
interface ATM2/2
 no ip address
 shutdown
 no atm ilmi-keepalive
 no scrambling-payload
!
interface ATM2/3
 no ip address
 shutdown
 no atm ilmi-keepalive
 no scrambling-payload
!
ip http server
!
ip classless
!
!
no cdp run
!
!
control-plane
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
 login
!
!
end

----------
router 2
----------

Current configuration : 901 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname NewYork
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
memory-size iomem 15
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
!
!
l2tp-class l2-dyn
 hostname NewYork
 password 7 0616582B48160E1C
 cookie size 8
!
pseudowire-class pw-dynamic
 encapsulation l2tpv3
 protocol l2tpv3 l2-dyn
 ip local interface Loopback0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 10.1.1.103 255.255.255.0
!
interface FastEthernet1/0
 no ip address
 duplex auto
 speed auto
 no cdp enable
!
interface FastEthernet1/0.201
 encapsulation dot1Q 201
 no cdp enable
 xconnect 10.1.1.102 34 pw-class pw-dynamic
!
ip http server
!
ip classless
!
!
no cdp run
!
!
control-plane
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
 
>>> "Fred Reimer" <freimer at ctiusa.com> 5/22/2008 12:21 PM >>>
Yes, with 3845's, post your test config.


Fred Reimer, CISSP, CCNP, CQS-VPN, CQS-ISS
Senior Network Engineer
Coleman Technologies, Inc.
954-298-1697


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Steven Pfister
> Sent: Thursday, May 22, 2008 12:11 PM
> To: cisco-nsp at puck.nether.net 
> Subject: [c-nsp] Need help with L2TPv3
> 
> I'm trying to get L2TPv3 figured out to help with a project. I've got a
> test network consisting of 2 3640s (which is what is going to be used
> as the endpoints of the tunnels in the production network) connect by a
> crossover cable. Even using sample configs from the cisco site, I can't
> seem to keep the tunnel from going down after about a minutes. I think
> it may be an authentication problem.
> 
> Does anyone have a working L2TPv3 tunnel between two 3640s?
> 
> Thank you!
> 
> Steve Pfister
> Technical Coordinator,
> The Office of Information Technology
> Dayton Public Schools
> 115 S. Ludlow St.
> Dayton, OH 45402
> 
> Office (937) 542-3149
> Cell (937) 673-6779
> Direct Connect: 137*131747*8
> Email spfister at dps.k12.oh.us 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp 
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Steve Pfister
Technical Coordinator, 
The Office of Information Technology
Dayton Public Schools
115 S. Ludlow St. 
Dayton, OH 45402
 
Office (937) 542-3149
Cell (937) 673-6779
Direct Connect: 137*131747*8
Email spfister at dps.k12.oh.us