[c-nsp] Need help with L2TPv3
David Prall
dcp at dcptech.com
Thu May 22 13:47:10 EDT 2008
There is no routing protocol configured in your sample configs? No static
route to the next hop. No interface with an ip address, besides the
loopback. I still think recursive route somewhere.
David
--
http://dcp.dcptech.com
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Steven Pfister
> Sent: Thursday, May 22, 2008 1:37 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Need help with L2TPv3
>
> The configs are below.
>
> By the way... whenever I post to this list, I get replies
> both to me and to the list (so I get two copies). Is this
> intentional? Just curious...
>
> Thanks!
>
> --Steve
>
> ----------
> router 1
> ----------
>
> Current configuration : 1374 bytes
> !
> version 12.3
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname SanFran
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> memory-size iomem 15
> ip subnet-zero
> !
> !
> ip cef
> no ip dhcp use vrf connected
> !
> !
> l2tp-class l2-dyn
> password 7 15025C0600722C21
> cookie size 8
> !
> pseudowire-class pw-dynamic
> encapsulation l2tpv3
> protocol l2tpv3 l2-dyn
> ip local interface Loopback0
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 10.1.1.102 255.255.255.0
> !
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> no cdp enable
> !
> interface FastEthernet0/0.200
> encapsulation dot1Q 200
> no snmp trap link-status
> no cdp enable
> xconnect 10.1.1.103 33 pw-class pw-dynamic
> !
> interface FastEthernet0/0.201
> encapsulation dot1Q 201
> no snmp trap link-status
> no cdp enable
> !
> interface ATM2/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> no scrambling-payload
> !
> interface ATM2/1
> no ip address
> shutdown
> no atm ilmi-keepalive
> no scrambling-payload
> !
> interface ATM2/2
> no ip address
> shutdown
> no atm ilmi-keepalive
> no scrambling-payload
> !
> interface ATM2/3
> no ip address
> shutdown
> no atm ilmi-keepalive
> no scrambling-payload
> !
> ip http server
> !
> ip classless
> !
> !
> no cdp run
> !
> !
> control-plane
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> !
> end
>
> ----------
> router 2
> ----------
>
> Current configuration : 901 bytes
> !
> version 12.3
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname NewYork
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> resource policy
> !
> memory-size iomem 15
> ip subnet-zero
> !
> !
> ip cef
> no ip dhcp use vrf connected
> !
> !
> l2tp-class l2-dyn
> hostname NewYork
> password 7 0616582B48160E1C
> cookie size 8
> !
> pseudowire-class pw-dynamic
> encapsulation l2tpv3
> protocol l2tpv3 l2-dyn
> ip local interface Loopback0
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 10.1.1.103 255.255.255.0
> !
> interface FastEthernet1/0
> no ip address
> duplex auto
> speed auto
> no cdp enable
> !
> interface FastEthernet1/0.201
> encapsulation dot1Q 201
> no cdp enable
> xconnect 10.1.1.102 34 pw-class pw-dynamic
> !
> ip http server
> !
> ip classless
> !
> !
> no cdp run
> !
> !
> control-plane
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> !
> end
>
> >>> "Fred Reimer" <freimer at ctiusa.com> 5/22/2008 12:21 PM >>>
> Yes, with 3845's, post your test config.
>
>
> Fred Reimer, CISSP, CCNP, CQS-VPN, CQS-ISS
> Senior Network Engineer
> Coleman Technologies, Inc.
> 954-298-1697
>
>
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > bounces at puck.nether.net] On Behalf Of Steven Pfister
> > Sent: Thursday, May 22, 2008 12:11 PM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Need help with L2TPv3
> >
> > I'm trying to get L2TPv3 figured out to help with a
> project. I've got a
> > test network consisting of 2 3640s (which is what is going
> to be used
> > as the endpoints of the tunnels in the production network)
> connect by a
> > crossover cable. Even using sample configs from the cisco
> site, I can't
> > seem to keep the tunnel from going down after about a
> minutes. I think
> > it may be an authentication problem.
> >
> > Does anyone have a working L2TPv3 tunnel between two 3640s?
> >
> > Thank you!
> >
> > Steve Pfister
> > Technical Coordinator,
> > The Office of Information Technology
> > Dayton Public Schools
> > 115 S. Ludlow St.
> > Dayton, OH 45402
> >
> > Office (937) 542-3149
> > Cell (937) 673-6779
> > Direct Connect: 137*131747*8
> > Email spfister at dps.k12.oh.us
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> Steve Pfister
> Technical Coordinator,
> The Office of Information Technology
> Dayton Public Schools
> 115 S. Ludlow St.
> Dayton, OH 45402
>
> Office (937) 542-3149
> Cell (937) 673-6779
> Direct Connect: 137*131747*8
> Email spfister at dps.k12.oh.us
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list