[c-nsp] Cisco 6509: WS-F6K-MSFC2 missing on WS-X6K-S2U-MSFC2

[Thomas Czarnetzki]

Hi

I have a Cisco 6509 with Supervisor-Engine 2 (WS-X6K-S2U-MSFC2).

According to the specification they have a MSFC2 on it, but i can see 
that in the Output of "show version".
I have put Out the Card and compare pictures from the MSFC2-Module with 
the Card. So i can confirm, that a MSFC2 is really mounted on the Card.

I have a second SUP2 with the same specification and a Second Chassis. 
The Problem is the same, so that i think, it can't be a hardware failure.


The output is as follows:

Console> (enable) show version
WS-C6509 Software, Version NmpSW: 8.5(1)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Oct 22 2005, 11:11:35

System Bootstrap Version: 7.1(1)
System Boot Image File is 'bootflash:cat6000-sup2k8.8-5-1.bin'
System Configuration register is 0x10f

Hardware Version: 2.0  Model: WS-C6509  Serial #: ...

PS1  Module: WS-CAC-1300W    Serial #: ...

Mod Port Model               Serial #    Versions
--- ---- ------------------- ----------- 
--------------------------------------
1   2    WS-X6K-S2U-MSFC2    ...         Hw : 5.3
                                         Fw : 7.1(1)
                                         Fw1: 6.1(3)
                                         Sw : 8.5(1)
                                         Sw1: 8.5(1)
         WS-F6K-PFC2         ...         Hw : 3.5
                                         Sw :

       DRAM                    FLASH                   NVRAM
Module Total   Used    Free    Total   Used    Free    Total Used  Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1      262144K  88516K 173628K  31232K  31232K      0K  512K  270K  242K

Uptime is 0 day, 0 hour, 27 minutes
Console> (enable)


Has somebody an idea why the module is not recognized?

Regards

Thomas