[c-nsp] PIX 6.x Site2Site with dynamic IP?

[Luan Nguyen]

Just change your A end to use dynamic map.
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration
_example09186a0080094680.shtml


Luan Nguyen
Chesapeake NetCraftsmen, LLC.
www.NetCraftsmen.net



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of William
Sent: Thursday, November 06, 2008 6:04 AM
To: cisco-nsp
Subject: [c-nsp] PIX 6.x Site2Site with dynamic IP?

Hi Chaps,

I use to have a VPN tunnel running between two sites using Cisco Pix
6.x, the B end now has a dynamic IP address every time the router
reloads which means the tunnel has gone down and to get it back up we
have to reconfigure a ISAKMP key and change our config here on the A
end.

Is there a way I can get round this? the router infront of our B-end
PIX is not Cisco nor is it under our control. My client downgraded
their Internet Service package which also meant that they now have a
dynamic IP address :(

Thanks for your time.

W
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/