[c-nsp] Cisco IOS for broadband aggregation

[Rinse Kloek]

Do you use 12.2(33)SRC2 in a box as Aggregation Router ?
One bug we discovered was a Netflow bug wich resulted in crashes  
(CSCsu87248)

kind regards Rinse
Paul Stewart schreef:
> We're running 12.2(33)SRC2 on NPE-2G's with no real issues - we were very
> brave and ran some 12.4T code for a while and had a major issue every 3-4
> weeks that required a reboot (inbound sessions would just stop coming in
> pretty much via l2tp tunnels).
>
> On the NPE-1G's we're running same release with no issue neither....
>
> Paul
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rinse Kloek
> Sent: Thursday, November 06, 2008 4:14 PM
> To: Roddy Strachan
> Cc: Cisco-nsp
> Subject: Re: [c-nsp] Cisco IOS for broadband aggregation
>
> What kind of features do you use with the 7206VXR box ? We are also 
> looking to upgrade to 12.2.31SB13 because we have some problems with 
> 12.2(31)SB6.
>
> regards Rinse
>
> Roddy Strachan schreef:
>   
>> Ruben,
>>
>> Funny you mention it.
>>
>> I've just finished an upgrade of a mixture of 7301 and 7206vxr to
>> 12.2(31)SB13.
>>
>> Had a 7301 running in production for 1 week, no issues, the LNS seems a
>>     
> lot
>   
>> more stable if you ask me.
>>
>> Don't know how the 7206 will go as they have been in production less than
>>     
> an
>   
>> hour :).
>>
>> So far so good, no real issues to report.
>>
>>
>>
>> On 7/11/08 8:03 AM, "Ruben Alvarez" <raa at opusnet.com> wrote:
>>
>>   
>>     
>>> Hi All,
>>>
>>> I'm upgrading IOS on my c7206VXR with an npe-300 and:
>>> UBR7200-I/O-2FE/E
>>> PA-A3-T3=
>>> PA-IMA-T1=
>>> PA-4E=
>>> I'm currently using 122-28.SB2 and noticed a 122-31.SB.  Is anyone using
>>>       
> the
>   
>>> 12.2(31)SB instead of the 12.2(28)SB?  I've been looking online and
>>>       
> haven't
>   
>>> seen much about it.  I assume it's got the same features as (28)?  If
>>>       
> anyone
>   
>>> has any feedback let me know.
>>>
>>> Thanks.
>>>
>>>     
>>>       
>> This email and any files transmitted with it are confidential and intended
>>  solely for the use of the individual or entity to whom they are
>>     
> addressed. 
>   
>> Please notify the sender immediately by email if you have received this 
>> email by mistake and delete this email from your system. Please note that
>>  any views or opinions presented in this email are solely those of the
>>  author and do not necessarily represent those of the organisation. 
>> Finally, the recipient should check this email and any attachments for 
>> the presence of viruses. The organisation accepts no liability for any 
>> damage caused by any virus transmitted by this email.
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>   
>>     
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>