[c-nsp] Multiple Ethernet links for redundancy

[Pete S.]

You can make each port a routed interface(/30 or /31) to the 6500. Control
the failover/load balancing with your IGP.

--Pete

On Fri, Nov 7, 2008 at 1:30 PM, Daniel Lacey <daniel_p_lacey at yahoo.com>wrote:

> Hi all,
>
> I have a 7206 with two fastethernet port adapters.
> I would like to have both of these run to the 6506 switch.
>
> I need a scenario that would allow one of the links to work if the other
> goes down.
> This is for redundancy and not for bandwidth issues.
>
> I was wondering if it is possible (or desirable) to make them a Multilink
> bundle?
>
> Any other suggestions?
>
> Thanks,
> Dan Lacey
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>