[c-nsp] Setting up Cisco 1811 for dial in access

[Aaron Riemer]

Hi Brian,

You need to configure the async interface on your 1811. 

Take a look here
 
http://www.cisco.com/en/US/docs/routers/access/1800/1801/software/config
uration/guide/dialbkup.html#wp1031537

Aaron Riemer
Network Engineer
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brian Raaen
Sent: Wednesday, 12 November 2008 1:27 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Setting up Cisco 1811 for dial in access

I am trying to set up a Cisco 1811 for ppp dial-in access for a client
and am 
having difficulty finding configuration information.  Most of the 
documentation I find is about using the router to dial out to support
the 
network, but I am trying to do the opposite.  I am trying to set up the 
router to provide access to the local network through a ppp dial in 
connection.  Thank you for your help.


----------------------

Brian Raaen
Network Engineer
braaen at zcorum.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.