[c-nsp] Setting up Cisco 1811 for dial in access

[David Prall]

Brian,
This should be a good start. It has been a long time since I did this. 

--
http://dcp.dcptech.com
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Brian Raaen
> Sent: Tuesday, November 11, 2008 11:27 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Setting up Cisco 1811 for dial in access
> 
> I am trying to set up a Cisco 1811 for ppp dial-in access for a client
> and am
> having difficulty finding configuration information.  Most of the
> documentation I find is about using the router to dial out to support
> the
> network, but I am trying to do the opposite.  I am trying to set up the
> router to provide access to the local network through a ppp dial in
> connection.  Thank you for your help.
> 
> 
> ----------------------
> 
> Brian Raaen
> Network Engineer
> braaen at zcorum.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/