[c-nsp] Setting up Cisco 1811 for dial in access

[David Prall]

This should help.
http://www.cisco.com/en/US/docs/ios/12_2/dial/configuration/guide/dafmodmg.h
tml


--
http://dcp.dcptech.com
 

> -----Original Message-----
> From: David Prall [mailto:dcp at dcptech.com]
> Sent: Tuesday, November 11, 2008 11:48 PM
> To: 'Brian Raaen'; 'cisco-nsp at puck.nether.net'
> Subject: RE: [c-nsp] Setting up Cisco 1811 for dial in access
> 
> Brian,
> This should be a good start. It has been a long time since I did this.
> 
> --
> http://dcp.dcptech.com
> 
> 
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > bounces at puck.nether.net] On Behalf Of Brian Raaen
> > Sent: Tuesday, November 11, 2008 11:27 PM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Setting up Cisco 1811 for dial in access
> >
> > I am trying to set up a Cisco 1811 for ppp dial-in access for a
> client
> > and am
> > having difficulty finding configuration information.  Most of the
> > documentation I find is about using the router to dial out to support
> > the
> > network, but I am trying to do the opposite.  I am trying to set up
> the
> > router to provide access to the local network through a ppp dial in
> > connection.  Thank you for your help.
> >
> >
> > ----------------------
> >
> > Brian Raaen
> > Network Engineer
> > braaen at zcorum.com
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/