[c-nsp] TelcoSystems EdgeGate 282 and Cisco 3560 10Full

[Christopher Hunt]

The cross-over fixed it.  The 3560 must be doing auto-mdix even on 
10/100 ports.  Thanks to all for the quick replies and I've got a nasty 
bump from the clue stick...

Christopher Hunt
ReachONE Internet, Inc.


Brandon Bennett wrote:
> Auto-mdix is disabled when you hard code speed/duplex.   Check to make 
> sure cable is a crossover
> 
> -Brandon
> 
> Sent from my iPhone
> 
> On Nov 20, 2008, at 6:56 PM, Christopher Hunt <chunt at reachone.com> wrote:
> 
>> I have a cisco 3560 switch connected to a TelcoSystems EdgeGate 282 
>> CPE switch provided by a local FTTx provider.
>> * Ethernet auto-negotiate works fine but,
>> * when the CPE at is hard-coded at 10/Full, and the 3560 at auto-auto, 
>> I get 10/Half on the 3560 (that's to be expected).
>> * Auto-auto on both gets me 100/Full on both (also expected).
>> * 10/Full on both gets me  nothing, link is down on both.
>>
>> We have put in a service case with Telco Systems to see if there is 
>> something we can do about it.  Has anyone any experience with this 
>> hardware?
>>
>> -- 
>> Christopher Hunt
>> ReachONE Internet, Inc.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/