[c-nsp] E1 to Fiber POP Device?

[Frank Bulk]

Are you looking to do E1 over Ethernet, or mux them into DS-3/OC-3?  It's
not clear what L2 you are going to do over the fiber.

Frank

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Felix Nkansah
Sent: Saturday, November 22, 2008 11:04 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] E1 to Fiber POP Device?

Hi,
A network design I am working on would aggregate/terminate E1 connections at
various sites or POPs and transfer the traffic over a fiber WAN.

I am trying to figure out a device that would do a good job in taking
incoming E1s and outgoing fiber. It appears to me that the Cisco AS5400XM
appliance does not have support for fiber connections.

I should be glad if any of you could recommend some Cisco product(s) for
accomplishing this task.

Many Thanks,

Felix
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/