[c-nsp] E1 to Fiber POP Device?

Felix Nkansah felixnkansah at gmail.com
Sat Nov 22 15:39:24 EST 2008


Hi Frank,
I am looking at Ethernet on the Fiber portion.

Felix

On Sat, Nov 22, 2008 at 7:13 PM, Frank Bulk <frnkblk at iname.com> wrote:

> Are you looking to do E1 over Ethernet, or mux them into DS-3/OC-3?  It's
> not clear what L2 you are going to do over the fiber.
>
> Frank
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Felix Nkansah
> Sent: Saturday, November 22, 2008 11:04 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] E1 to Fiber POP Device?
>
> Hi,
> A network design I am working on would aggregate/terminate E1 connections
> at
> various sites or POPs and transfer the traffic over a fiber WAN.
>
> I am trying to figure out a device that would do a good job in taking
> incoming E1s and outgoing fiber. It appears to me that the Cisco AS5400XM
> appliance does not have support for fiber connections.
>
> I should be glad if any of you could recommend some Cisco product(s) for
> accomplishing this task.
>
> Many Thanks,
>
> Felix
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>


More information about the cisco-nsp mailing list