[c-nsp] VPLS vfi down

[Arda Balkanay]

AFAIK for VPLS you will need an ES20 card or SIP400 card.
with 6500 and LAN cards you can only configure edge of H-VPLS with xconnects
under physical interfaces (not under SVIs).

On Fri, Nov 21, 2008 at 3:39 PM, Phil Mayers <p.mayers at imperial.ac.uk>wrote:

> Suzan S. wrote:
>
>> Dears,Iam trying to configure VPLS on 6509 with SUP-720, is there a
>> limitation on the modules which support VPLS. The xconnect is
>> configured on interface vlan for the giagethernet port.IS there any
>> solution to get the vfi UP?Thank you
>>
>
> VPLS requires WAN cards i.e. SIP-400.
>
> "Normal" 6500 linecards i.e. LAN cards can only do point-to-point EoMPLS
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>