[c-nsp] shape withing policy map

[Tassos Chatzithomaoglou]

Also make sure you don't exceed the max-reserved bandwidth (default=75%).

-- 
Tassos

Marko Milivojevic wrote on 25/11/2008 07:48:
> You made a small configuration mistake.
> 
>> Enter configuration commands, one per line.  End with CNTL/Z.
>> JID_CORE_Router(config)#policy-map CMS
>> JID_CORE_Route(config-pmap-c)#shape average 1000000
>> JID_CORE_Route(config-pmap-c)#
>>
>> It takes the command just fine.
> 
> You need to aply shape command under the class, not under the policy-map:
> 
> policy-map CMS
>  class CMS
>   shape average ...
> !
> ! Note that shape uses Kb/s and not b/s.
> 
> However, you may find that this may not work on an ATM interface.
> 
> --
> Marko
> CCIE #18427 (SP)
> My network blog: http://cisco.markom.info/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>