[c-nsp] shape withing policy map

[james edwards]

On Mon, Nov 24, 2008 at 10:48 PM, Marko Milivojevic <markom at markom.info>wrote:

> You made a small configuration mistake.
>
> > Enter configuration commands, one per line.  End with CNTL/Z.
> > JID_CORE_Router(config)#policy-map CMS
> > JID_CORE_Route(config-pmap-c)#shape average 1000000
> > JID_CORE_Route(config-pmap-c)#
> >
> > It takes the command just fine.
>
> You need to aply shape command under the class, not under the policy-map:
>
> policy-map CMS
>  class CMS
>   shape average ...



Thanks, I should of mentioned I tried that and it did not work.



>
> !
> ! Note that shape uses Kb/s and not b/s.
>
> However, you may find that this may not work on an ATM interface.
>
>
Correct, it does not.


I am finding using the bandwidth command and WRED is working well.

I raised the interface limits to 90% available bandwidth.

Thanks to all who responded,

-- 
James H. Edwards
Senior Network Systems Administrator
Judicial Information Division
jedwards at nmcourts.gov