[c-nsp] AIR-AP1252AG-A-K9 wont work with controller WS-C3750G-24WS-S25

[Andy Yerofyeyev]

Hello ,

We upgraded 1252 to lightweight version but AP still wont register to
WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below

console messages on AP:

%DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address
10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508

%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server (213.130.0.1)
[OK]

%LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DHCP
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for
CISCO-LWAPP-CONTROLLER.domain.com
%LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through  DNS
%LWAPP-5-CHANGED: LWAPP changed state to JOIN
%SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: INCOMPATIBLE
CONTROLLER VERSION.
%LWAPP-5-CHANGED: LWAPP changed state to DOWN

sh ver from AP:

Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version 12.4(13d)JA,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 08-Feb-08 17:33 by prod_rel_team

ROM: Bootstrap program is C1250 boot loader
BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE
SOFTWARE (fc2)

AP001f.cabd.b508 uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export at cisco.com.

cisco AIR-AP1252AG-A-K9    (PowerPC 8349) processor (revision A0) with
49142K/16384K bytes of memory.
Processor board ID FTX12189109
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from power-on
LWAPP image version 3.0.51.0
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1F:CA:BD:B5:08
Part Number                          : 73-10425-05
PCA Assembly Number                  : 800-27630-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC121704DG
Top Assembly Part Number             : 800-29039-01
Top Assembly Serial Number           : FTX12189109
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1252AG-A-K9

Configuration register is 0xF



-- 
Best Regards,

Andriy Yerofyeyev CCIE #21607