[c-nsp] AIR-AP1252AG-A-K9 wont work with controller WS-C3750G-24WS-S25

[David Rose]

Andy,

Which version of code you have on your controller?  Best guess is the
code you are running on the controller doesn't support the 1252s.

David




Andy Yerofyeyev wrote:
> Hello ,
>
> We upgraded 1252 to lightweight version but AP still wont register to
> WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below
>
> console messages on AP:
>
> %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address
> 10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508
>
> %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
> Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server (213.130.0.1)
> [OK]
>
> %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DHCP
> %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
> %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for
> CISCO-LWAPP-CONTROLLER.domain.com
> %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through  DNS
> %LWAPP-5-CHANGED: LWAPP changed state to JOIN
> %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: INCOMPATIBLE
> CONTROLLER VERSION.
> %LWAPP-5-CHANGED: LWAPP changed state to DOWN
>
> sh ver from AP:
>
> Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version 12.4(13d)JA,
> RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2008 by Cisco Systems, Inc.
> Compiled Fri 08-Feb-08 17:33 by prod_rel_team
>
> ROM: Bootstrap program is C1250 boot loader
> BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE
> SOFTWARE (fc2)
>
> AP001f.cabd.b508 uptime is 0 minutes
> System returned to ROM by power-on
> System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export at cisco.com.
>
> cisco AIR-AP1252AG-A-K9    (PowerPC 8349) processor (revision A0) with
> 49142K/16384K bytes of memory.
> Processor board ID FTX12189109
> PowerPC 8349 CPU at 533Mhz, revision number 0x0031
> Last reset from power-on
> LWAPP image version 3.0.51.0
> 1 Gigabit Ethernet interface
>
> 32K bytes of flash-simulated non-volatile configuration memory.
> Base ethernet MAC Address: 00:1F:CA:BD:B5:08
> Part Number                          : 73-10425-05
> PCA Assembly Number                  : 800-27630-05
> PCA Revision Number                  : A0
> PCB Serial Number                    : FOC121704DG
> Top Assembly Part Number             : 800-29039-01
> Top Assembly Serial Number           : FTX12189109
> Top Revision Number                  : A0
> Product/Model Number                 : AIR-AP1252AG-A-K9
>
> Configuration register is 0xF
>
>
>
>