[c-nsp] AIR-AP1252AG-A-K9 wont work with controller WS-C3750G-24WS-S25

Wed Oct 1 23:08:29 EDT 2008

David , appreciate your response , below information I gather from
controller.

debugging on controller itself does NOT noticed any warning about AP,
moreover controller shows AP as registered when AP goes to reboot.

Any ideas where I can find information about interoperability between
controllers and AP ? I digging into cisco.com without any luck :(

ny-vts03-wifi(config-if)#do sh ver
Load for five secs: 4%/0%; one minute: 5%; five minutes: 5%
Time source is NTP, 23:04:51.846 EST Wed Oct 1 2008
Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version
12.2(40)SE, RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 24-Aug-07 00:56 by myl
Image text-base: 0x00003000, data-base: 0x01700000

ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)FZ2, RELEASE
SOFTWARE (fc1)

ny-vts03-wifi uptime is 1 day, 6 hours, 10 minutes
System returned to ROM by power-on
System restarted at 16:54:09 EST Tue Sep 30 2008
System image file is "flash:/c3750-advipservicesk9-mz.122-40.SE.bin"

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 4.0.179.11
RTOS Version..................................... 4.0.179.11
Bootloader Version............................... 4.0.179.11
Build Type....................................... DATA + WPS

System Name...................................... ny-wifi01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.747
IP Address....................................... 10.0.200.3
System Up Time................................... 0 days 0 hrs 3 mins 4 secs

Configured Country............................... United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +41 C

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
--More-- or (q)uit
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0

Burned-in MAC Address............................ 00:1B:53:63:DB:00
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK

(Cisco Controller) >show inventory

NAME: "Chassis"    , DESCR: "Cisco Wireless Controller"
PID: WS-C3750G-24WS-S25,  VID: V01,  SN: FOC1117G01F

On Wed, Oct 1, 2008 at 10:52 PM, David Rose
<mailing-list at technicelixir.com>wrote:

> Andy,
>
> Which version of code you have on your controller?  Best guess is the
> code you are running on the controller doesn't support the 1252s.
>
> David
>
>
>
>
> Andy Yerofyeyev wrote:
> > Hello ,
> >
> > We upgraded 1252 to lightweight version but AP still wont register to
> > WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below
> >
> > console messages on AP:
> >
> > %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address
> > 10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508
> >
> > %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
> > Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server (
> 213.130.0.1)
> > [OK]
> >
> > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through
> DHCP
> > %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
> > %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for
> > CISCO-LWAPP-CONTROLLER.domain.com
> > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through
>  DNS
> > %LWAPP-5-CHANGED: LWAPP changed state to JOIN
> > %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason:
> INCOMPATIBLE
> > CONTROLLER VERSION.
> > %LWAPP-5-CHANGED: LWAPP changed state to DOWN
> >
> > sh ver from AP:
> >
> > Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version
> 12.4(13d)JA,
> > RELEASE SOFTWARE (fc2)
> > Technical Support: http://www.cisco.com/techsupport
> > Copyright (c) 1986-2008 by Cisco Systems, Inc.
> > Compiled Fri 08-Feb-08 17:33 by prod_rel_team
> >
> > ROM: Bootstrap program is C1250 boot loader
> > BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE
> > SOFTWARE (fc2)
> >
> > AP001f.cabd.b508 uptime is 0 minutes
> > System returned to ROM by power-on
> > System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx"
> >
> >
> > This product contains cryptographic features and is subject to United
> > States and local country laws governing import, export, transfer and
> > use. Delivery of Cisco cryptographic products does not imply
> > third-party authority to import, export, distribute or use encryption.
> > Importers, exporters, distributors and users are responsible for
> > compliance with U.S. and local country laws. By using this product you
> > agree to comply with applicable laws and regulations. If you are unable
> > to comply with U.S. and local laws, return this product immediately.
> >
> > A summary of U.S. laws governing Cisco cryptographic products may be
> found
> > at:
> > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> >
> > If you require further assistance please contact us by sending email to
> > export at cisco.com.
> >
> > cisco AIR-AP1252AG-A-K9    (PowerPC 8349) processor (revision A0) with
> > 49142K/16384K bytes of memory.
> > Processor board ID FTX12189109
> > PowerPC 8349 CPU at 533Mhz, revision number 0x0031
> > Last reset from power-on
> > LWAPP image version 3.0.51.0
> > 1 Gigabit Ethernet interface
> >
> > 32K bytes of flash-simulated non-volatile configuration memory.
> > Base ethernet MAC Address: 00:1F:CA:BD:B5:08
> > Part Number                          : 73-10425-05
> > PCA Assembly Number                  : 800-27630-05
> > PCA Revision Number                  : A0
> > PCB Serial Number                    : FOC121704DG
> > Top Assembly Part Number             : 800-29039-01
> > Top Assembly Serial Number           : FTX12189109
> > Top Revision Number                  : A0
> > Product/Model Number                 : AIR-AP1252AG-A-K9
> >
> > Configuration register is 0xF
> >
> >
> >
> >
>
>

-- 
Best Regards,

Andriy Yerofyeyev CCIE #21607