[c-nsp] Etherchannel Load Balancing

[Euan Galloway]

On Fri, Oct 03, 2008 at 12:39:31PM +0100, A.L.M.Buxey at lboro.ac.uk wrote:

> configuration of your network... eg, in this case,
> if a server is on the network and all clients
> is on a different network, then as far as the cisco
> is aware, then all traffic in that scenario will
> look the same to the load balancer (source IP = server,
> dest IP = router/gateway address).  

Dest IP wouldn't be router/gateway, it would be the client IPs 
(multiple client IPs in your example, so should load balance ok 
with src-dst-ip).

Fair point for src/dst MAC when the hash is src-dst-mac though.

-- 
Euan