[c-nsp] command or third party software about switch port

[Arie Vayner (avayner)]

The way to do it is to check the MAC address learned on that port (show
mac-address), and then use the "show ip arp" command using that MAC
address on the 1st layer 3 hop (the router which used as L3 default
gateway for that VLAN.

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of kcc
Sent: Thursday, October 09, 2008 19:59 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] command or third party software about switch port

Hi all

ls any software / command to find out the ip address of the computer
which is connecting to switch portxx

I want to check this ip of server when the switch portxx is using high
bandwidth?

thanks
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/