[c-nsp] command or third party software about switch port

[Teller, Robert]

One way is to connect to the device and type
show mac address-table interface gigabitEthernet 1/12

This will give you all mac addresses associated to an interface, copy
the mac address and connect to your core router and type
show ip arp 000b.cd42.4a1c

this will then give you the ip address that goes with that mac address.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of kcc
Sent: Thursday, October 09, 2008 10:59 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] command or third party software about switch port

Hi all

ls any software / command to find out the ip address of the computer
which
is connecting to switch portxx

I want to check this ip of server when the switch portxx is using high
bandwidth?

thanks
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


#########################################################
The information contained in this e-mail and subsequent attachments may be privileged, 
confidential and protected from disclosure.  This transmission is intended for the sole 
use of the individual and entity to whom it is addressed.  If you are not the intended 
recipient, any dissemination, distribution or copying is strictly prohibited.  If you 
think that you have received this message in error, please e-mail the sender at the above 
e-mail address.
#########################################################