[c-nsp] command or third party software about switch port

[Sean Granger]

Solarwinds packages this up, nice and pretty, with it's "Switch Port Mapper".
You don't want to know how much that costs ...
But if you already own the Engineer's toolset, go for it.

>>> "Arie Vayner (avayner)" <avayner at cisco.com> 10/09/08 01:34PM >>>
The way to do it is to check the MAC address learned on that port (show
mac-address), and then use the "show ip arp" command using that MAC
address on the 1st layer 3 hop (the router which used as L3 default
gateway for that VLAN.

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net 
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of kcc
Sent: Thursday, October 09, 2008 19:59 PM
To: cisco-nsp at puck.nether.net 
Subject: [c-nsp] command or third party software about switch port

Hi all

ls any software / command to find out the ip address of the computer
which is connecting to switch portxx

I want to check this ip of server when the switch portxx is using high
bandwidth?

thanks
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/ 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/