[c-nsp] TwinGig on Cat4900M

[Arie Vayner (avayner)]

Yes, the TwinGig modules work only on the extension modules, and would
not work on the onboard ports.
Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Dmitry Kiselev
Sent: Friday, October 17, 2008 10:39 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] TwinGig on Cat4900M

Hello!

Could anybody in the list confirm thats TwinGig convertors are work fine
in 8 onboard 10G ports in 4900M? I heard strange rumors thats only
8-port half-cards are support TwinGigs, no support for onboard ports and
4-port half-card due to lack of special ASICs.

Thanks!

--
Dmitry Kiselev
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/