[c-nsp] EIGRP routing failure

[Mohammed Dado]

Dears,

We're configuring EIGRP on both sides, customer and ISP. The customer router are dumping the following logs. Here's an example of some logs ..


128326: Oct  6 02:48:05.387 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency
128327: Oct  6 02:48:05.435 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is down: K-value mismatch
128328: Oct  6 02:48:19.519 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency
128329: Oct  6 02:57:37.414 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired
128330: Oct  6 02:57:41.210 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency
128331: Oct  6 02:58:46.495 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired
128332: Oct  6 02:58:50.655 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency
128333: Oct  6 02:58:52.699 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is down: K-value mismatch
128334: Oct  6 02:58:57.623 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency
128335: Oct  6 02:59:36.491 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired
128336: Oct  6 02:59:44.327 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor
10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency


Can anybody assist ?


Best Regards,

Mohammed Dado
Technical Support Engineer - EMEA

Airspan Communications Ltd
 [cid:identifierFooterImage]