[c-nsp] rtr responder on 6500

[Phil Mayers]

Holemans Wim wrote:
> We are setting up a testbed for IP SLA monitoring and I wanted to
> include our core 6500 switches into the test. For 2 of them this went
> without problem, on two others this doesn't work : I get the following
> error (after putting on debug) :
> 
> RTR unable to set SO_STRICT_ADDR_BIND option
> 
>  
> 
> I searched the Cisco website and also did a google search but this
> didn't give any results. Anyone an idea of what is going wrong here ?
> 
> Both not-working routers have a SUP32, the working ones a SUP2
> supervisor.
> 
> Router1     s3223_rp-IPBASEK9-VM   Version 12.2(18)SXF6
> WS-SUP32-GE-3B  : rtr responder not working
> 
> Router2     s222_rp-IPSERVICESK9-M Version 12.2(18)SXF6
> WS-X6K-SUP2-2GE : rtr responder working
> 
> Router3     s3223_rp-IPBASEK9-VM   Version 12.2(18)SXF6
> WS-SUP32-GE-3B  : rtr responder not working
> 
> Router4     s222_rp-IPSERVICESK9-M Version 12.2(18)SXF6
> WS-X6K-SUP2-2GE : rtr responder working
> 
>  
> 
> Is it possible I need the ipservices version to do this ? Anyone a clue
> on what the error means ? The rtr responder command is accepted in all
> versions.

I think you need ipservices.

Also, IIRC RTR has crash-bugs under SXF, and you are advised to not use 
it at all :o(