[c-nsp] rtr responder on 6500

[Holemans Wim]

We are setting up a testbed for IP SLA monitoring and I wanted to
include our core 6500 switches into the test. For 2 of them this went
without problem, on two others this doesn't work : I get the following
error (after putting on debug) :

RTR unable to set SO_STRICT_ADDR_BIND option

 

I searched the Cisco website and also did a google search but this
didn't give any results. Anyone an idea of what is going wrong here ?

Both not-working routers have a SUP32, the working ones a SUP2
supervisor.

Router1     s3223_rp-IPBASEK9-VM   Version 12.2(18)SXF6
WS-SUP32-GE-3B  : rtr responder not working

Router2     s222_rp-IPSERVICESK9-M Version 12.2(18)SXF6
WS-X6K-SUP2-2GE : rtr responder working

Router3     s3223_rp-IPBASEK9-VM   Version 12.2(18)SXF6
WS-SUP32-GE-3B  : rtr responder not working

Router4     s222_rp-IPSERVICESK9-M Version 12.2(18)SXF6
WS-X6K-SUP2-2GE : rtr responder working

 

Is it possible I need the ipservices version to do this ? Anyone a clue
on what the error means ? The rtr responder command is accepted in all
versions.

 

Wim Holemans

Netwerkdienst Universiteit Antwerpen