[c-nsp] ctr+break sequence and Cisco 3500

[Luan Nguyen]

http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_reco
very09186a0080094184.shtml


Luan Nguyen
Chesapeake NetCraftsmen, LLC.
www.NetCraftsmen.net
(e) luan at netcraftsmen.net
(aim/yahoo): luancnc



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of snort bsd
Sent: Tuesday, October 28, 2008 8:24 PM
To: cisco-nsp
Subject: [c-nsp] ctr+break sequence and Cisco 3500

Hi all:

I might not have done hundreds times but certainly did a lot of times. But
not this time. trying to breaking a cisco 3550 since lost password. I tried
sequence of "ctrl+break" but not working for me. it just reboots back to
normal working status. Then I just tried "ctrl+b" and not working either.
checked with Cisco web page and I don't see anything special. Did i miss
something here or just this Cisco 3550 has something special for password
recovery?


Thanks


      Search 1000's of available singles in your area at the new Yahoo!7
Dating. Get Started http://au.dating.yahoo.com/?cid=53151&pid=1011
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/