[c-nsp] ISDN 2x64kbps

[Muhammad Salman Zahid]

configure the BRI inerface instead of dialer interface.



On Wed, Oct 29, 2008 at 12:42 PM, ambedkar <p_ambedkar at rediffmail.com>wrote:

>
> Hi,
> This is Ambi from india. i am using ISDN connectivity between two
> remote places. i am having one ISDN number which is having 2x64kbps
> capability. when i am connecting with this ISDN number, i am able to
> connect only one B-channel and second B-channel is unable to
> establish.
> i have configured the router with the following parameters.
>
> interface BRI1/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-net3
> .
> .
> .
> .
> interface Dialer1
> ip address 192.168.1.2 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 600
> dialer string xxxxxxxxxx
> dialer-group 1
> !
> and vice-versa.
>
> please help me in this regard.
> bye.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
"Death is no the greatest loss in life ....
The greatest loss is what dies inside
 you while U live...!"