[c-nsp] Bulk Cisco Device Prep

Rupert Finnigan rupert.finnigan at horsatack.co.uk
Wed Oct 29 12:23:41 EDT 2008


Hi All,
 
I'm looking into various ways to prep Cisco devices, based on an existing template, so they can be "configured" and deployed by technical, but non-cisco people.
 
I'm either thinking about a Perl script that generates a file based on a couple of "fill in the blanks", that can be accessed via TFTP when the vanilla device firstboots, or a .NET app that talks directly to the console port and applies the config as if it were typed.
 
There must be a number of guys on this list that have to deploy a large number devices, Routers or Switches, that follow a core config with only a minor change here for there (ie, VTP Domain, or Management IP).. I'd be very interested to hear how you do this, or is you've got any pointers.
 
And, if the finished product would be of any use to someone, I'll gladly send the source over!
 
Thanks,
 
Rupert

Please consider the environment before printing this email.

CONFIDENTIALITY: This email (and any attachments) is confidential and is intended only
for the attention of the addressee(s). Its unauthorised use, disclosure, storage or 
copying is not permitted. The material may also be the subject of copyright protection.
If you are not the named recipient, please notify the sender immediately and delete
the message from your computer. Do not disclose the contents to another person,
use it for any purpose, or store or copy the information in any medium.
Disclosure to anyone other than the named recipient, whether inadvertent or
otherwise is not intended to waive privilege or confidentiality. If this
message is encrypted only the named recipient is authorised to decrypt the
message. Unauthorised decryption is prohibited and may be unlawful.
Unauthorised decryption will not waive privilege or confidentiality.

DISCLAIMER: The views expressed in this email are those of the originator and do 
not necessarily represent the views of Horsatack Saddlery Limited.
Internet communications are not secure. Any reply to this message could be 
intercepted and read by someone else. Please bear that in mind when deciding 
whether to send material in response to this message by email. We do not accept
responsibility for any changes made to this message after it was sent. We 
cannot accept any liability for any loss or damage sustained as a result of 
software viruses.

Horsatack Saddlery Limited - Registered in England & Wales No. 6393070. 
Registered Office: Greenway House, Sugarswell Business Park, Shenington, Banbury, Oxon, OX15 6HW, UK.
VAT No. GB 929699352.



More information about the cisco-nsp mailing list