[c-nsp] ME Switch Managment over Trunk Interfaces?

[cp]

I'm new to Cisco ME switches, so please bare with my basic question. I
am having a difficult time trying to manage the device over trunk
interface. It doesn't work.  My management IP lives on a vlan interface.
Below is my configuration.  I tried vlan1 without luck too. Do I really
have to burn a port for management? I'm probably missing something
simple. Any assistance is appreciated. 

 

Thanks,

Chip

 

 

 

vlan 100-106

 

interface GigabitEthernet0/1

port-type nni

 switchport trunk native vlan 106

 switchport trunk allowed vlan 100-106

 switchport mode trunk

 

interface Vlan106

 ip address 10.24.100.2 255.255.255.252