[c-nsp] 10G 6704 and 6708

[Tim Stevenson]

Clearly each port in the channel may treat the "same" traffic 
differently, depending on how you configure the queuing for those 
port types. If you are not using qos, then there should be no 
functional difference.

Tim

At 10:48 AM 10/31/2008, Phil Mayers observed:
>Tim Stevenson wrote:
>>You can disable that check with "no mls qos channel-consistency".
>
>That's very useful to know.
>
>Does it have any adverse effect or unwelcome implications?



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.