[c-nsp] Allow VTY access by telnet and ssh

[Alex Balashov]

All logins are on VTYs, so that qualification is not needed.

Check out:

http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/mgaccess.html

tony kam wrote:

> It meant users can use either telnet or ssh client to log into router 
> VTY lines. Besides, I think it is possible to use ACL to control which 
> user group can use telnet and which user group can use ssh.
>  
> Please advise if you have such sample configuration.
> 
>  > Date: Fri, 5 Sep 2008 02:25:18 -0400
>  > From: abalashov at evaristesys.com
>  > To: chiwaikam at hotmail.com
>  > CC: cisco-nsp at puck.nether.net
>  > Subject: Re: [c-nsp] Allow VTY access by telnet and ssh
>  >
>  > tony kam wrote:
>  > > Dear all,
>  > >
>  > > Please advise if there is any configuration template to enable both 
> telnet and ssh to have access right into router VTY lines.
>  >
>  > What do you mean by "right into?"
>  >
>  > --
>  > Alex Balashov
>  > Evariste Systems
>  > Web : http://www.evaristesys.com/
>  > Tel : (+1) (678) 954-0670
>  > Direct : (+1) (678) 954-0671
>  > Mobile : (+1) (706) 338-8599
> 


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599