[c-nsp] Allow VTY access by telnet and ssh

[Alex Balashov]

Whoops, that was for ASAs.

Try:

http://articles.techrepublic.com.com/5100-10878_11-5875046.html
http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml

Alex Balashov wrote:

> All logins are on VTYs, so that qualification is not needed.
> 
> Check out:
> 
> http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/mgaccess.html 
> 
> 
> tony kam wrote:
> 
>> It meant users can use either telnet or ssh client to log into router 
>> VTY lines. Besides, I think it is possible to use ACL to control which 
>> user group can use telnet and which user group can use ssh.
>>  
>> Please advise if you have such sample configuration.
>>
>>  > Date: Fri, 5 Sep 2008 02:25:18 -0400
>>  > From: abalashov at evaristesys.com
>>  > To: chiwaikam at hotmail.com
>>  > CC: cisco-nsp at puck.nether.net
>>  > Subject: Re: [c-nsp] Allow VTY access by telnet and ssh
>>  >
>>  > tony kam wrote:
>>  > > Dear all,
>>  > >
>>  > > Please advise if there is any configuration template to enable 
>> both telnet and ssh to have access right into router VTY lines.
>>  >
>>  > What do you mean by "right into?"
>>  >
>>  > --
>>  > Alex Balashov
>>  > Evariste Systems
>>  > Web : http://www.evaristesys.com/
>>  > Tel : (+1) (678) 954-0670
>>  > Direct : (+1) (678) 954-0671
>>  > Mobile : (+1) (706) 338-8599
>>
> 
> 


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599