[c-nsp] Allow VTY access by telnet and ssh

Jay Hennigan jay at west.net
Fri Sep 5 03:20:54 EDT 2008


tony kam wrote:
> Dear all,
>  
> Please advise if there is any configuration template to enable both telnet and ssh to have access right into router VTY lines. 

Did you try:

line vty 0 4
  transport input telnet ssh

The number of vty lines may be different depending on platform and IOS, 
for example, "line vty 0 15".

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV


More information about the cisco-nsp mailing list