[c-nsp] Service-Policy on 1800 SVI

[Rubens Kuhl Jr.]

Does the same apply to Cisco 881 ?


Rubens


On Sun, Sep 7, 2008 at 10:47 PM, Brett Looney <brett at looney.id.au> wrote:
>> I'm running into an issue on a 1841 router where I have an internet
>> feed coming into one of the integrated switchports....I have the vlan
>> that the switchport is configured in as a EtherSVI with a public IP
>> address. I need to configure a policy-map with QoS but it appears
>> you cannot configure a service-policy on a EtherSVI...Is this correct?
>
> That's pretty much correct. You need to put the service policy on a routed
> port - either one of the two onboard Ethernets or get one of the routed HWIC
> cards (such as a HWIC-1FE) which are (of course) much more expensive than
> the HWIC switch cards.
>
> Putting a service policy on a SVI just doesn't work. On some platforms you
> can do it but you are severely limited in what you can do in that policy.
>
> B.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>