[c-nsp] Tool(free?) to extract vlan+trunk info from Cat4003

[mb at adv.gcomm.com.au]

Hi,

We have a few old Cat4003's that we need to get all L2 Info from(All 
vlans/trunks etc) - Was hoping there was a tool(free) that could 
automate the task?

Had a look at Cisco Network Assist, and enabled http server on the 4ks, 
but it looks like CNA is requesting info that does not exist on the 
4003's:

2008 Sep 08 19:39:18 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/exec/show/version/CR from client 0.0.0.0 not found
2008 Sep 08 19:39:18 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/exec/show/version/CR from client 0.0.0.0 not found
2008 Sep 08 19:39:18 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/exec/show/version/CR from client 0.0.0.0 not found
2008 Sep 08 19:39:19 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/exec/show/version/CR from client 0.0.0.0 not found
2008 Sep 08 19:39:19 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/screens/base/hw_info.html from client 0.0.0.0 not found
2008 Sep 08 19:39:19 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/screens/base/hw_info.html from client 0.0.0.0 not found
2008 Sep 08 19:39:19 aest +10:00 %MGMT-5-HTTP_URINOTFOUND:Request for 
/screens/base/hw_info.html from client 0.0.0.0 not found
...

Thanks in advance.



-------------------------------------------------------------------------
This e-mail was sent via Data FX Online WebMail http://www.datafx.com.au/