[c-nsp] Errors before boot loader
Rodney Dunn
rodunn at cisco.com
Tue Sep 9 10:35:01 EDT 2008
No.
Rodney
On Tue, Sep 09, 2008 at 04:01:52PM +0200, Rens wrote:
> Hi,
>
>
>
> Should I worry about errors that are sent from the boot loader?
>
>
>
> %SYS-4-CONFIG_NEWER: Configuration from version 12.4 may not be correctly
> understood
>
> %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define
> it.
>
> %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define
> it.
>
> %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define
> it.
>
> % CEF not enabled. Enable first
>
> % CEF not enabled. Enable first
>
> % CEF not enabled. Enable first
>
> % CEF not enabled. Enable first
>
> %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
>
>
>
> Regards,
>
>
>
> Rens
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list