[c-nsp] Buffer Tuning pointer?

[jason.plank at comcast.net]

Scott,

Review: http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080093fc5.shtml

This URL is good for getting an understanding on what a buffer miss actually is. I usually look at what the buffers are currently set to and increase in varying increments.

--
Regards,

Jason Plank
CCIE #16560
e: jason.plank at comcast.net

 -------------- Original message ----------------------
From: "Scott Granados" <gsgranados at comcast.net>
> I'm using a 7206 NPE-G1 and noticing a lot of buffer misses.  Everything 
> that I find via Google points me to opening a support case but provides very 
> little background information.  There's also a "buffer tune automatic" 
> command but little listed about it's proper use.  Does anyone have a good 
> buffer tuning pointer or pointer for good fundamental / n00by information 
> concerning buffers?
> 
> Thank you
> Scott
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/