[c-nsp] Errors before boot loader

[Ziv Leyes]

I had a similar problem then updated the boot loader to a newer one and the problem was solved.
To this I must ask, what's the most important reason I'd want to use a boot loader AND an IOS while I can just use IOS that can boot-load too?
Ziv






-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mark Tinka
Sent: Wednesday, September 10, 2008 11:51 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Errors before boot loader

On Wednesday 10 September 2008 16:28:35 Peter Rathlev wrote:

> If it's a platform with seperate boot-image (like 7200) you could
> update this boot loader. I don't know exactly why one would/wouldn't
> do that, but the first line seems to indicate that boot-image and
> IOS-image are different versions.

We see these kinds of logs from the boot loader on various 7200's we have in production, e.g., it says the 'mtu'
command configured on one or more of the interfaces named is not supported, e.t.c., and yet we know the full IOS image supports it.

It doesn't bother us, since we know the full image will have the full feature support we need.

Cheers,

Mark.



 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************