[c-nsp] GSR12008 Error

[Chris Lane]

No errors as you can see.
cr.la1.ca#sh controller fia
Fabric configuration: 2.4Gbps bandwidth, redundant fabric
Master Scheduler: Slot 17     Backup Scheduler: Slot 16

>From Fabric FIA Errors
-----------------------
redund fifo parity 0          redund overflow 0          cell drops 0

crc32 lkup parity  0          cell parity     0          crc32      0

Switch cards present    0x001F    Slots  16 17 18 19 20
Switch cards monitored  0x001F    Slots  16 17 18 19 20
Slot:     16         17         18         19         20
Name:    csc0       csc1       sfc0       sfc1       sfc2
       --------   --------   --------   --------   --------
los    0          0          0          0          0
state  Off        Off        Off        Off        Off
crc16  0          0          0          0          0

To Fabric FIA Errors
-----------------------
sca not pres 0          req error     0          uni fifo overflow 0

grant parity 0          multi req     0          uni fifo undrflow 0

cntrl parity 0          uni req       0          crc32 lkup parity 0

multi fifo   0          empty dst req 0          handshake error   0
On Wed, Sep 10, 2008 at 4:10 PM, Leonardo Gama Souza <
leonardo.souza at nec.com.br> wrote:

>  Hi,
>
> Look for errors in "show controller fia".
> Maybe the LC was badly seated...
> Maybe you have a bad SFC...
> There are a lot of possibilities.
>
> Cheers,
> Leonardo Gama.
>
> ------------------------------
> *De:* cisco-nsp-bounces at puck.nether.net em nome de Chris Lane
> *Enviada:* qua 10/9/2008 15:58
> *Para:* cisco-nsp at puck.nether.net
> *Assunto:* [c-nsp] GSR12008 Error
>
>  All,
>
> GSR question, appears Cisco finally got around to updating the IOS train on
> 12.0.32.S – we have been running S8 for a while but S11 just came out and
> it
> appears to have many new features! One of my routers is running 12.0.32.S6
> –
> its been so for 2years. I had a bad 8 port FastE lc a while back so I
> replaced just recently with a known good lc tested in the lab,  So I sent
> it
> to  replace the failed one ~ after 2 days I started getting these errors.
>
> %FABRIC-3-ERR_HANDLE:
>
> %RP-3-FABRIC_UNI
>
> %FIA-3-HALT
>
> L%LC-6-BMACMDRPLY
>
>
>
> >From what I gather this is the RP is having trouble communicating with the
> LC.  One of these errors suggests upgrading IOS ~ but S6 to S8 isn't that
> big of a deal and couldn't possibly be the culprit could it? Is this RP
> related? And if so I could easily flip to the backup RP.
>
> Any suggestions would be super appreciative.
>
> --
> //CL
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
//CL