[c-nsp] RES: GSR12008 Error

[Leonardo Gama Souza]

Oh. I forgot one thing.
You must issue this command on all LC as well.
 

________________________________

De: Chris Lane [mailto:clane1875 at gmail.com]
Enviada: qua 10/9/2008 17:25
Para: Leonardo Gama Souza
Cc: cisco-nsp at puck.nether.net
Assunto: Re: [c-nsp] GSR12008 Error


No errors as you can see.  
cr.la1.ca#sh <http://cr.la1.ca/#sh>  controller fia
Fabric configuration: 2.4Gbps bandwidth, redundant fabric
Master Scheduler: Slot 17     Backup Scheduler: Slot 16

>From Fabric FIA Errors
-----------------------
redund fifo parity 0          redund overflow 0          cell drops 0         
crc32 lkup parity  0          cell parity     0          crc32      0         
Switch cards present    0x001F    Slots  16 17 18 19 20 
Switch cards monitored  0x001F    Slots  16 17 18 19 20 
Slot:     16         17         18         19         20
Name:    csc0       csc1       sfc0       sfc1       sfc2
       --------   --------   --------   --------   --------
los    0          0          0          0          0          
state  Off        Off        Off        Off        Off       
crc16  0          0          0          0          0          
 
To Fabric FIA Errors
-----------------------
sca not pres 0          req error     0          uni fifo overflow 0         
grant parity 0          multi req     0          uni fifo undrflow 0         
cntrl parity 0          uni req       0          crc32 lkup parity 0         
multi fifo   0          empty dst req 0          handshake error   0
On Wed, Sep 10, 2008 at 4:10 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:


	Hi,
	 
	Look for errors in "show controller fia".
	Maybe the LC was badly seated...
	Maybe you have a bad SFC...
	There are a lot of possibilities.
	 
	Cheers,
	Leonardo Gama.

________________________________

	De: cisco-nsp-bounces at puck.nether.net em nome de Chris Lane
	Enviada: qua 10/9/2008 15:58
	Para: cisco-nsp at puck.nether.net
	Assunto: [c-nsp] GSR12008 Error
	
	

	
	All,
	
	GSR question, appears Cisco finally got around to updating the IOS train on
	12.0.32.S - we have been running S8 for a while but S11 just came out and it
	appears to have many new features! One of my routers is running 12.0.32.S6 -
	its been so for 2years. I had a bad 8 port FastE lc a while back so I
	replaced just recently with a known good lc tested in the lab,  So I sent it
	to  replace the failed one ~ after 2 days I started getting these errors.
	
	%FABRIC-3-ERR_HANDLE:
	
	%RP-3-FABRIC_UNI
	
	%FIA-3-HALT
	
	L%LC-6-BMACMDRPLY
	
	
	
	>From what I gather this is the RP is having trouble communicating with the
	LC.  One of these errors suggests upgrading IOS ~ but S6 to S8 isn't that
	big of a deal and couldn't possibly be the culprit could it? Is this RP
	related? And if so I could easily flip to the backup RP.
	
	Any suggestions would be super appreciative.
	
	--
	//CL
	
	_______________________________________________
	cisco-nsp mailing list  cisco-nsp at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-nsp
	archive at http://puck.nether.net/pipermail/cisco-nsp/
	

	




-- 
//CL