[c-nsp] Cisco 2955T-12 at 12 VDC?

[Ian McDonald]

Frank Bulk wrote:
> The specs say it requires 24 VDC, but I'm wondering if anyone has
> successfully operated the 2955T-12 at 12 VDC?
> 
> Frank
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 

The spec sheet does say 18V minimum. However, you could use one of the 
magic devices people buy so they can use their 18-24V accessories in 
their 12V motor cars.

Total output load by Cisco's spec sheet is 23W maximum, which is just 
under an Amp at 24V.

Hence this regulated 2.5A model would be plenty sufficient to make it 
work from 12V.

http://www.quasarelectronics.com/cva540.htm

I'm sure you can find similar wherever in the world you are.

HTH
-- 
ian