[c-nsp] ME3750 Shaping

[Eric Van Tol]

>From: Brad Henshaw [mailto:brad.henshaw at qcn.com.au]
>Sent: Saturday, September 13, 2008 8:58 AM
>To: Eric Van Tol; Arie Vayner (avayner); cisco-nsp at puck.nether.net
>Subject: RE: [c-nsp] ME3750 Shaping
>
>You can also do egress rate limitation - 'srr-queue bandwidth limit ><10..90>'
>
>This limits the egress rate to a percentage of the physical port speed.
>
>Regards,
>Brad

Yes, but this is a limit for all 4 queues combined.  It may work for the layer 3 ports, but not meet the requirements of the layer 2 trunk port with 2 VLANs on it.

-evt