[c-nsp] RES: Cisco 12406 Etherchannel

[Nitzan Tzelniker]

You need 12.0(33)S1

Starting in Cisco IOS Release 12.0(33)S, Engine 5 line cards are also
supported as the egress interface on which you can configure a virtual
interface (EtherChannel or POS channel) for a link bundle. For a list of
supported Engine 5 interfaces, see Line Cards Supported on the Cisco 12000
Router<http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/lnkbndl.html#wp1041951>.


Nitzan

On Tue, Sep 16, 2008 at 18:57, Mark Tech <techconfig at yahoo.com> wrote:

> Hi, thanks for that. Just had a look at my inventory
>
> sh inventory
> NAME: "slot 0", DESCR: "ISE 10G Modular Services Card v2"
> PID: 12000-SIP-601     , VID: V04, SN: SAD12340460
>
> Looks like I have an ISE card installed. If I look at the restrictions for
> the ISE, seems like only the following cards are supported:
>
> IP Service Engine (ISE):
> –4-port Gigabit Ethernet ISE line card
> –4-port OC-3c/STM-1c POS/SDH ISE line card
> –8-port OC-3c/STM-1c POS/SDH ISE line card
> –16-port OC-3c/STM-1c POS/SDH ISE line card
> –4-port OC-12c/STM-4c POS/SDH ISE line card
> –1-port OC-48c/STM-16c POS/SDH ISE line card
>
> However it then goes to mention that the following cards support it.
>
> Engine 5 SPA Interface Processors (SIPs):
> –10G Engine 5 SPA Interface Processor (12000-SIP-600)
> –2.5G multiservice engine SPA Interface Processor (12000-SIP-401)
> –5G multiservice engine SPA Interface Processor (12000-SIP-501)
> –10G multiservice engine SPA Interface Processor (12000-SIP-601)
>
> The GE cards are installed in a 12000-SIP-601, or is that I don't have
> an'Engine 5' within the 601installed?
>
> Regards
>
> Mark
>
>
>
> ----- Original Message ----
> From: Leonardo Gama Souza <leonardo.souza at nec.com.br>
> To: Mark Tech <techconfig at yahoo.com>
> Cc: cisco-nsp at puck.nether.net
> Sent: Tuesday, September 16, 2008 3:49:54 PM
> Subject: RES: [c-nsp] Cisco 12406 Etherchannel
>
>
> There are some restrictions...
> Take a look:
> http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/lnkbndl.html
>
> Cheers.
>
> ________________________________
> De: cisco-nsp-bounces at puck.nether.net em nome de Mark Tech
> Enviada: ter 16/9/2008 08:12
> Para: cisco-nsp at puck.nether.net
> Assunto: [c-nsp] Cisco 12406 Etherchannel
>
>
> Hi
> I am trying to configure Ethernchannel/link bundling on a 12406. The port
> channel seems to be accepted, however when I try and add a channel-group to
> my GE interfaces, it says its not supported? I am using SPA-10X1GE-V2 line
> cards with c12kprp-p-mz.120-32.SY6.bin IOS
>
>
> interface Port-channel1
>  ip address x.x.x.x 255.255.255.252
>  no ip directed-broadcast
>  channel-group minimum active 1
>  no channel-group bandwidth control-propagation
>
> router(config-if)#channel-group 1
> Error: not supported on GigabitEthernet0/0/0.
>
> Is there a way to bundle more that 1GE port on a 12406?
>
> Regards
>
>  Mark
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>