[c-nsp] Cisco 2820 Password Recovery

Crist Clark Crist.Clark at globalstar.com
Fri Sep 19 19:59:47 EDT 2008


>>> On 9/19/2008 at 4:38 PM, "Daniel Hooper" <dhooper at emerge.net.au>
wrote:
> Don’t you mean 2620?

No, I mean Catalyst 2820,

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps597/prod_end-of-life_notice0900aecd8055eb4d.html

> Sending a break to the console during the router booting is the only
way 
> I've known to recover from a lost password.

The procedure for the later versions involves holding the "MODE"
button
down on the front of the chassis while doing a cold boot. For the
earlier
versions, call TAC,

http://www.cisco.com/en/US/products/hw/switches/ps574/products_password_recovery09186a00800a6c79.shtml

As I said in the original message, this appears to be an earlier
version.

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Crist Clark
> Sent: Saturday, 20 September 2008 5:54 AM
> To: cisco-nsp at puck.nether.net 
> Subject: [c-nsp] Cisco 2820 Password Recovery
> 
> First off, yes, I know. This is an ancient piece of hardware.
> No, we're not going to use it in production anywhere. Just a
> few more ports in the lab already installed nicely in a rack.
> 
> Yes, it is ancient, so ancient Cisco TAC doesn't seem to want to
> or is not able to help us with password recovery. But all of
> the documentation I've found at Cisco and other places says
> that's what we need to do. The procedure for the "newer"
> firmware versions (i.e. after 1997 or so) does not seem to work
> so I'm assuming this is an earlier version that they say
> requires a call to Cisco.
> 
> So, am I SOOL, and it's a dumb switch, or is there a way to
> get in there without Cisco TAC?
> -- 
> 
> Crist J. Clark                              
> crist.clark at globalstar.com 
> Globalstar Communications                                (408)
> 933-4387
> 
> 
> B¼information contained in this e-mail message is confidential,
intended
> only for the use of the individual or entity named above. If the
reader
> of this e-mail is not the intended recipient, or the employee or
agent
> responsible to deliver it to the intended recipient, you are hereby
> notified that any review, dissemination, distribution or copying of
this
> communication is strictly prohibited. If you have received this
e-mail
> in error, please contact postmaster at globalstar.com 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp 
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp 
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 



B¼information contained in this e-mail message is confidential, intended
only for the use of the individual or entity named above. If the reader
of this e-mail is not the intended recipient, or the employee or agent
responsible to deliver it to the intended recipient, you are hereby
notified that any review, dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this e-mail
in error, please contact postmaster at globalstar.com 


More information about the cisco-nsp mailing list