[c-nsp] SXI1 is out

[Jared Mauch]

netflow on the 65xx is broken enough i'm surprised it gave you any  
data of value.

	- jared

On Apr 1, 2009, at 12:42 PM, Mike Louis wrote:

> Good to know. I didn't it much in SXH, just installed SXH enough  
> long enough to see the command was there. We had a multi-VRF  
> deployment and SXH crashed and went to ROMMON once we configured 3  
> or more EIGRP AS #s in VRF-Lite deployment. We had to go to SXI for  
> stability with EIGRP and VRF-lite. Then we lost Netflow commands  
> again outside the global VRF.
>
> Mike
>
>
> -----Original Message-----
> From: Phil Mayers [mailto:p.mayers at imperial.ac.uk]
> Sent: Wednesday, April 01, 2009 12:41 PM
> To: Mike Louis
> Cc: Jared Mauch; Tassos Chatzithomaoglou; cisco-nsp
> Subject: Re: [c-nsp] SXI1 is out
>
> Mike Louis wrote:
>> SXI didn't support Netflow export from a VRF other than the global  
>> table. The command option wasn't available in the ip flow export  
>> command syntax.
>>
>> Here is what I am seeing in SXI
>>
>> 6509(config)#ip flow-export destination 10.1.1.3 9996 ?
>>  <cr>
>>
>> The vrf flag was available in SXH.
>
> It didn't work properly in SXH. It only exported MSFC-switched flows.
>
>>
>> Has that been fixed in SXI1?
>>
>
>
> Note: This message and any attachments is intended solely for the  
> use of the individual or entity to which it is addressed and may  
> contain information that is non-public, proprietary, legally  
> privileged, confidential, and/or exempt from disclosure.  If you are  
> not the intended recipient, you are hereby notified that any use,  
> dissemination, distribution, or copying of this communication is  
> strictly prohibited.  If you have received this communication in  
> error, please notify the original sender immediately by telephone or  
> return email and destroy or delete this message along with any  
> attachments immediately.