[c-nsp] EEM event-manager and "event none" question.

[M Usman Ashraf]

Hi,

You have to use "event none", under "event manager applet A-EU-UP", if you
want to do so.

On Mon, Apr 6, 2009 at 9:18 PM, luismi <asturluismi at gmail.com> wrote:

> I have this code...
>
> event manager applet A-EU-UP
>  event track 10 state up
>  action 1.0 syslog msg "Track 10 Up. Houston we don't have a problem"
>  action 2.0 cli command "enable"
>  action 3.0 cli command "conf t"
>  action 4.0 cli command "<some commands here>"
>
> I tried to execute...
> # event manager run  A-EU-UP
> Embedded Event Manager policy EU-ACEL-BACKUP-OFF not registered with
> event none Event Detector
>
> What is the reason for that message?
> Looks like the EEM code is not running.
> As far as I can read at documentation found with google, I need "event
> none" at the beginning of the applet, but, what is the reason for it?
> When "event none" must be used?
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Regards,

M Usman Ashraf